3 x 1KG SILK Filament 1.75mm
3 x 1KG SILK Filament 1.75mm
SILK 3D filament set of 3 different filaments with diameter of 1.75mm. Made in EU (Slovenia) , High quality PETG resin, Clear prints & Vibrant colors. No stringing, no warping, no clogging & compatible with majority...
The price varies depending on the option selected!from 76,77 €
|Filament Diameter||1.75 mm|
|Filament color||Color sets|
SILK 3D filament set of 3 different filaments with diameter of 1.75mm. Made in EU (Slovenia) , High quality PETG resin, Clear prints & Vibrant colors. No stringing, no warping, no clogging & compatible with majority of FDM 3D printers.
This is a SILK 3D filament set of 3 different filaments. Each have filament diameter of 1.75mm. This product is Made in EU (Slovenia) , mixed with high quality SILK resin it gives beautiful clear prints and vibrant colors. No stringing, no warping, no clogging & compatible with majority of FDM 3D printers. Order more colors and save money, you can choose from five different colors of your choice!
Test specimens print settings:
3D printer: Creality Ender 3
Infill: 20 %
Nozzle temperature: 230 °C
Bed temperature: 80 °C
Nozzle: 0,4 mm
Layer height: 0,2 mm
Print speed: 50 mm/s
Nozzle temperature: 220–240°C
Heated bed: Recommended 60-80°C
Print speed: 50–100 mm/s
Build platform: Glass bed, Kaptontape, Blue tape.
Access to all technical data sheets can be found here.
Due to its exceptional appearance, Silk filament is currently the best-selling product among 3D filaments for 3D printing. When printing with Silk filament, you can expect a shiny and silky finish on the final product, which is not only aesthetically appealing but also successfully conceals the transitions between layers.
Silk filament for 3D printing is a versatile, easy-to-use material and is usually used in 3D printing. Silk Filament is a special mix of material with certain additives, and can be 3D printed in much the same way as normal PETG.
For good results, it is necessary to print at a temperature of 220-240°C and the printing table should be heated to 80°C. Please note that the temperature range of the print media may slightly differ depending on the use of other printers.
Our Silk filament for printers is specially designed to make it easy to use for all beginners and novices. It is accessible, easy to use and a good material because it has excellent properties and it does not shrink when printing.
In addition, it fits nicely to the printing table. Silk filament is a material that is distinguished by an amazing gloss finish, and therefore it is also used for the printing of decorative elements.
Our Silk filament is compatible with almost all 3D printers, including RepRap and MakerBot printers, Ultimaker, Bits from Bytes, Airwolf3D, Makergear, Printrbot, Bukobot, Type A Machines and many more.
AzureFilm Silk filament with a net weight of 1 kg (2.2 lbs) or 0.5 kg (1.10 lbs), in rolls of 210 mm of external diameter, with an inside opening of 60 mm and a width of 62 mm. The filament is vacuum-sealed and contains a bag that absorbs moisture and allows the filament to remain fresh. The thickness of the Silk filament is 1.75 mm.
Technical Data Sheet
Material Comparison PLA Strongman, ABS Plus, PLA
Mechanical Characteristic PLA Strongman, ABS Plus, PLA
PLA Filament TDS
PLA Filament MSDS
PETG Filament TDS
PETG Filament MSDS
PETG Test report (Testing of materials and articles intended to come into contact with food)
PLA Strongman TDS
PLA Strongman MSDS
SILK Filament MSDS
ABS Plus Filament TDS
ABS Plus Filament SDS
ASA Filament TDS
ASA Filament SDS
FLEXIBLE Filament 98A TDS
FLEXIBLE Filament 98A MSDS
FLEXIBLE Filament 85A TDS
FLEXIBLE Filament 85A MSDS
PET Carbon Fiber Filament TDS
PAHT Carbon Fiber Filament TDS