PETG Filament Grey
PETG Filament Grey
The price varies depending on the option selected!from 9,97 €
|Filament Diameter||1.75 mm, 2.85 mm|
|Filament weight||1000g, 2100g, 300g, 5000g|
Made in EU, high quality PETG resin, beautiful clear prints, vibrant colors, no stringing, no warping, no clogging.
Compatible with majority of FDM 3D printers.
Test specimens print settings:
3D printer: Creality Ender 3
Infill: 20 %
Nozzle temperature: 230 °C
Bed temperature: 80 °C
Nozzle: 0,4 mm
Layer height: 0,2 mm
Print speed: 50 mm/s
Nozzle temperature: 220–240°C
Heated bed: Recommended 60-80°C
Print speed: 50–100 mm/s
Build platform: Glass bed, Kaptontape, Blue tape.
Access to all technical data sheets can be found here.
PETG Filament 1KG net weight 1 kg (2.2 lbs), in the welding positions on the reel with the outer diameter of 210 mm, with an inside opening of 60 mm diameter and a width of the reel of 62 mm. The filament is vacuum-sealed and contains a bag that absorbs moisture and allows the filament to remain fresh. The thickness of the PETG filament is 1.75 mm or 2.85 mm and is produced in more than 10 different shades.
PETG (polyethylene terephthalate) filament is a plastic thread that combines the properties of the ABS filament (solid, temperature-resistant, extremely durable) and the PLA filament (easy to print). Because of these properties, PETG is a filament material for 3D printing that you must have. It is environmentally friendly and can be recycled after use. Precisely because of its excellent chemical stability, PETG is a material that meets all the requirements of the European Parliament and the Council on artificial substances in contact with food products and medicines.
Our PETG filament is extremely durable, solid and odorless. It is an excellent filament that combines a combination of strength and flexibility, so it is used for printing mechanical products or in robotics. Because it has an extremely minimal degree of shrinkage and bending, it is ideal for printing large products. It is a material that is distinguished by a gloss finish, and therefore it is also used for the printing of decorative elements.
For good results, you must print at a temperature of 220–240°C, and the printing table should be heated to 80-90°C. Please note that the temperature range of the print media may slightly differ depending on the use of other printers.
Plastic thread made of PETG material easily adheres to the printing table so that it can be printed on acrylic, glass or polyamide tape. The advantage of PETG material is that you do not need a sealed printer for printing, and the print speed is comparable to that of PLA filament printing. The PETG material has an excellent support structure due to the strength that helps to ensure that the layers are perfectly adhering during the printing, and consequently the products are structurally strong and resistant to mechanical influences.
✅ Easy to print
❌ Susceptible to moisture
❌ Surface scratches easily
Strength: High| Flexibility: Medium | Durability: High
Difficulty to use: Low | Shrinkage/warping: Minimal
Soluble: No | Food safety: Azurefilm PETG is food safe (here is the certification)
Technical Data Sheet
Material Comparison PLA Strongman, ABS Plus, PLA
Mechanical Characteristic PLA Strongman, ABS Plus, PLA
PLA Filament TDS
PLA Filament MSDS
PETG Filament TDS
PETG Filament MSDS
PETG Test report (Testing of materials and articles intended to come into contact with food)
PLA Strongman TDS
PLA Strongman MSDS
SILK Filament TDS
SILK Filament MSDS
ABS Plus Filament TDS
ABS Plus Filament SDS
ASA Filament TDS
ASA Filament SDS
FLEXIBLE Filament 98A TDS
FLEXIBLE Filament 98A MSDS
FLEXIBLE Filament 85A TDS
FLEXIBLE Filament 85A MSDS
PET Carbon Fiber Filament TDS
PET Carbon Fiber Filament SDS
PAHT Carbon Fiber Filament TDS
PAHT Carbon Fiber Filament SDS
Nylon PA6 TDS
okt 15, 2019
okt 15, 2019
It can be a little hard to remove from the bed, so I find it best to twist it off while it is still hot. Otherwise great prints and no stringing.PETG Filament Grey