PETG Filament Moon Light
PETG Filament Moon Light
|Filament Diameter||1.75 mm|
Made in EU, high quality PETG resin, beautiful clear prints, vibrant colors, no stringing, no warping, no clogging.
Compatible with majority of FDM 3D printers.
Test specimens print settings:
3D printer: Creality Ender 3
Infill: 20 %
Nozzle temperature: 230 °C
Bed temperature: 80 °C
Nozzle: 0,4 mm
Layer height: 0,2 mm
Print speed: 50 mm/s
Nozzle temperature: 220–240°C
Heated bed: Recommended 60-80°C
Print speed: 50–100 mm/s
Build platform: Glass bed, Kaptontape, Blue tape.
Access to all technical data sheets can be found here.
PETG (polyethylene terephthalate) filament is a plastic thread that combines the properties of the ABS filament (solid, temperature-resistant, extremely durable) and the PLA filament (easy to print). Because of these properties, PETG is a filament for 3D printing that you must have. It is environmentally friendly and can be recycled after use. Precisely because of its excellent chemical stability, PETG is a material that meets all the requirements of the European Parliament and the Council on artificial substances in contact with food products and medicines. We can find it in water bottles, clothing fibers and food containers.
Our PETG filament is extremely durable, solid, and odorless. It is an excellent filament that combines a combination of strength and flexibility, so it is also used for printing mechanical products in robotics. Because it has an extremely minimal degree of shrinkage and bending, it is ideal for printing large products. It is a material that is distinguished by a gloss finish, and therefore it is also used for the printing of decorative elements.
For good results, you must print at a temperature of 220–240°C, and the printing table should be heated to 80-90°C. Please note that the temperature range of the print media may slightly differ depending on the use of other printers.
The advantage of PETG material is that is very easy to print; you do not need a 3D printer with an enclosure, and the print speed is comparable to the printing of PLA filament. The PETG material has an excellent support structure due to the strength that helps to ensure that the layers are perfectly adhering during the printing, and consequently the products are structurally strong and resistant to mechanical influences.
✅ Easy to print
❌ Susceptible to moisture
❌ Surface scratches easily
Strength: High| Flexibility: Medium | Durability: High
Difficulty to use: Low | Shrinkage/warping: Minimal
Soluble: No | Food safety: Azurefilm PETG is food safe (here is the certification)
No FAQs available for this product