Download REELfinity for free HERE!

Test specimens print settings:

Printing Recommendations:
Nozzle temperature: 220–240°C
Heated bed: Recommended 60-80°C
Print speed: Above 50 mm/s
Build platform: Glass bed, Kaptontape, Blue tape.

Access to all technical data sheets can be found here.

Introducing our new Refill PETG filaments, available in White, Black, Grey, Blue, Lipstick Red, and Tiger Orange. We designed these 1KG filaments to use with our REELfinity spool, which reduces waste and minimizes the impact on the environment.

Check out our assembly video of our REELfinity spool and Refill filaments and see how easy they are to set up!

Download REELfinity for free

PETG (polyethylene terephthalate) filament is a plastic thread that combines the properties of the ABS filament (solid, temperature-resistant, extremely durable) and the PLA filament (easy to print). Because of these properties, PETG is a filament for 3D printing that you must have. It is environmentally friendly and can be recycled after use. Precisely because of its excellent chemical stability, PETG is a material that meets all the requirements of the European Parliament and the Council on artificial substances in contact with food products and medicines. We can find it in water bottles, clothing fibres and food containers.

Our PETG filament is extremely durable, solid, and odourless. It is an excellent filament that combines a combination of strength and flexibility, so it is also used for printing mechanical products in robotics. Because it has an extremely minimal degree of shrinkage and bending, it is ideal for printing large products. It is a material that is distinguished by a gloss finish, and therefore it is also used for the printing of decorative elements.

For good results, you must print at a temperature of 220-240°C, and the printing table should be heated to 80-90°C. Please note that the temperature range of the print media may slightly differ depending on the use of other printers.

The advantage of PETG material is that is very easy to print;  you do not need a 3D printer with an enclosure, and the print speed is comparable to the printing of PLA filament. The PETG material has an excellent support structure due to the strength that helps to ensure that the layers are perfectly adhering during the printing, and consequently, the products are structurally strong and resistant to mechanical influences.

✅ Flexible

✅ Durable

✅ Easy to print

❌ Susceptible to moisture

❌ Surface scratches easily

Strength: High| Flexibility: Medium | Durability: High

Difficulty to use: Low  | Shrinkage/warping: Minimal

Soluble: No  |  Food safety: AzureFilm PETG is food safe (here is the certification)