- Additional information
- Reviews (0)
Filament PLA Strongman has a net weight of 1 kg (2.2 lbs), in the welding position on the reel of 210 mm in diameter, with an inside opening of 60 mm and a width of 62 mm. The filament is vacuum-sealed and contains a bag that absorbs moisture and allows the filament to remain fresh. The thickness of the PLA filament is 1.75 mm or 2.85 mm and is produced in four different shades.
The Strongman filament is as solid as the ABS filament and still has the functionality of ordinary PLA material. Filament Strongman was developed because users do not like the ABS filament since it creates difficulties during the printing process. Compared to conventional PLA filament, the PLA Strongman is much tougher and impact-resistant. It is used for printing drones, bearings and all products that require greater strength. In the video, you can see how we dropped a half-kilogram weight on plain PLA filament and PLA Strongman filament. Plain PLA filament was broken and the PLA Strongman remained unchanged.
Regarding the temperature resistance, this filament is equal to the ordinary PLA filament.
For good results, you must print at a temperature of 190-210 ° C and the printing table should be heated to 50-60 ° C. Please note that the range in the print temperature may slightly differ depending on the use of other printers.
|Dimensions||230 × 230 × 65 mm|
|Teža Filamenta neto|
|Weight of the Filament|